The YJ frame I got was tweaked, so I got rid of it and picked up a CJ7 frame. I outboarded the springs in front, and used Waggy springs. In the rear, I welded on a rear crossmember with a new shackle hanger and used Cherokee springs to stretch the wheelbase back a few inches. I believe it's about 100" right now. This weekend I swapped the drivetrain over from the rusty CJ to the bare frame. I can start running brake lines, fuel lines, and exhaust. I also need to figure out how to build the center crossmember.
And as it turns out, my engine is actually a 360, not a 304 like I was told. I'm happy with that change.
And as it turns out, my engine is actually a 360, not a 304 like I was told. I'm happy with that change.
Last edited: